Technical Data
| Machine type | Top Roll Diameter (mm) |
Wall thickness prebending* (mm) | Wall thickness rounding* (mm) | Installed Power (kW) |
L x W x H (mm) | Working speed (m/min) | Weight (kg) | Control |
|---|---|---|---|---|---|---|---|---|
| Plate Width: 2.100mm | ||||||||
| TETRA 110 | 270 | 14 | 16 | 10 | 4.400 x 1.050 x 1.600 | 8 | 9.700 | CNC |
| TETRA 120 | 290 | 18 | 21 | 10 | 4.400 x 1.050 x 1.600 | 8 | 10.300 | CNC |
| TETRA 130 | 320 | 22 | 27 | 17 | 4.400 x 1.100 x 1.700 | 8 | 11.700 | CNC |
| TETRA 140 | 340 | 26 | 31 | 17 | 4.400 x 1.100 x 1.700 | 8 | 12.400 | CNC |
| TETRA 150 | 360 | 30 | 36 | 25 | 4.500 x 1.100 x 1.800 | 8 | 14.200 | CNC |
| TETRA 160 | 390 | 35 | 41 | 25 | 4.500 x 1.100 x 1.800 | 8 | 15.400 | CNC |
| Plate Width: 2.600mm | ||||||||
| TETRA 210 | 300 | 13 | 15 | 10 | 4.900 x 1.050 x 1.600 | 8 | 10.800 | CNC |
| TETRA 220 | 320 | 17 | 19 | 10 | 4.900 x 1.050 x 1.600 | 8 | 11.500 | CNC |
| TETRA 230 | 340 | 20 | 24 | 17 | 4.900 x 1.100 x 1.700 | 8 | 13.100 | CNC |
| TETRA 240 | 370 | 24 | 28 | 17 | 4.900 x 1.100 x 1.700 | 8 | 14.000 | CNC |
| TETRA 250 | 400 | 28 | 33 | 25 | 5.000 x 1.100 x 1.800 | 8 | 16.100 | CNC |
| TETRA 260 | 430 | 32 | 38 | 25 | 5.000 x 1.100 x 1.800 | 8 | 17.500 | CNC |
| Plate Width: 3.100mm | ||||||||
| TETRA 310 | 320 | 12 | 14 | 10 | 5.400 x 1.050 x 1.600 | 8 | 12.000 | CNC |
| TETRA 320 | 340 | 15 | 18 | 10 | 5.400 x 1.050 x 1.600 | 8 | 12.900 | CNC |
| TETRA 330 | 370 | 19 | 22 | 17 | 5.400 x 1.100 x 1.700 | 8 | 14.500 | CNC |
| TETRA 340 | 390 | 22 | 26 | 17 | 5.400 x 1.100 x 1.700 | 8 | 15.800 | CNC |
| TETRA 350 | 420 | 26 | 30 | 25 | 5.500 x 1.200 x 1.800 | 8 | 18.000 | CNC |
| TETRA 360 | 450 | 30 | 35 | 25 | 5.500 x 1.200 x 1.800 | 8 | 20.000 | CNC |
* At yield strength 260 N/mm2 and a diameter of 5 x the top roll diameter.
Technological Characteristics
– Working speed: 8m/min
– Electromechanic rolls drive: best level of efficiency
– Swing arm fixation with double-sided bearings (no stud)
– Energy-efficient hydraulic system: low operating costs
– Computer unit protected in the switch cabinet
– Switch cabinet integrated in the machine frame
– Hydraulic aggregate integrated in the frame
– Short swing arms: narrow bending geometry
– Compact design – no foundation pit
– Rolls made of high alloyed and tempered steel
– Minimum bearing distances: increases of rolls stiffness
– 7-axis CNC control included
– Hydraulic components: Bosch Rexroth, Parker
– Bearings: SKF, FAG, INA
– Electric components: Beckhoff, Siemens, Phoenix, Murrelektronik
